Product added to cart
Gigabyte GeForce RTX™ 2060 OC 6G Graphics Card, GV-N2060OC-6GD Integrated with 6GB GDDR6 192-bit memory interface, 1755 MHz
Next
ASUS Phoenix GeForce® GTX 1060 3GB GDDR5 Graphics Card
Previous
Built for those who need all the cooling their case can handle, the Versa J24 RGB is custom built for what the very best tempered glass and mesh paneling have to offer. In designing the J24, we tried to keep the case as clean and sleek as possible, while maintaining airflow and plenty of space to work in. The light of 3 built-in 120mm 12V RGB front fans are dual-mode controlled either via the I/O port RGB button or the synchronization with enthusiasts’ favorite RGB capable motherboard brands, including Asus, Gigabyte, MSI, ASRock, and Biostar.
Versa J24 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
The left side of the J24 features a full length 4mm thick tempered glass panel, which is more durable and less prone to scratches and dust than acrylic panels. The tempered glass window is designed to slide into place and can be attached firmly with just two screws at the rear panel.
Forget fiddly drive bays and running out of space where you need it. The Versa J24 features totally tool-less drive bays that are interchangeable between above and below the power supply cover, as well as behind the motherboard tray for a total of seven expansion slots
The J24 is designed to make the most of that mesh front panel, whether you prefer air cooling or liquid. It comes fitted with one exhaust fan at the rear and three 12V RGB fans in the front, but you can comfortably fit two more 120/140mm fans at the top.
ASUS Phoenix GeForce® GTX 1060 3GB GDDR5 Graphics Card
Previous
Thermaltake Versa J24 Tempered Glass RGB Edition Mid-Tower Chassis
Rs. 13,300.00
SKU
J24-4
Sindh, Pakistan
12 SalesJoined since Mar 30, 2019
PRODUCT DESCRIPTION:
Thermaltake Versa J24 Tempered Glass RGB Edition Mid-Tower Chassis
Built for those who need all the cooling their case can handle, the Versa J24 RGB is custom built for what the very best tempered glass and mesh paneling have to offer. In designing the J24, we tried to keep the case as clean and sleek as possible, while maintaining airflow and plenty of space to work in. The light of 3 built-in 120mm 12V RGB front fans are dual-mode controlled either via the I/O port RGB button or the synchronization with enthusiasts’ favorite RGB capable motherboard brands, including Asus, Gigabyte, MSI, ASRock, and Biostar.
Supporting the latest PC hardware and high-end GPU solutions, it gives you all the utility benefits you need.
3 Built-in 120mm 12V RGB Fans
Versa J24 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software. Visit the support page for motherboard information or to download the software
*Caution: the motherboard signal connector only supports 12V header.
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, Versa J24 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync-enabled motherboards.
Built-in PSU Cover
With a built-in power supply cover, the J24 features plenty of ventilation to keep your power supply cool while also hiding away all those cables.
Tempered Glass Window
The left side of the J24 features a full length 4mm thick tempered glass panel, which is more durable and less prone to scratches and dust than acrylic panels. The tempered glass window is designed to slide into place and can be attached firmly with just two screws at the rear panel.
Tool-Free Installation
Forget fiddly drive bays and running out of space where you need it. The Versa J24 features totally tool-less drive bays that are interchangeable between above and below the power supply cover, as well as behind the motherboard tray for a total of seven expansion slots
3.5” or 2.5” HDD Drive Compatible
Superior Hardware Support
Don’t skimp on the power – the J24 gives you all the space you need for high-end hardware. It can fit a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA cards of up to 330mm in length, and a power supply with length of up to 160mm.
Excellent Cooling Capability
The J24 is designed to make the most of that mesh front panel, whether you prefer air cooling or liquid. It comes fitted with one exhaust fan at the rear and three 12V RGB fans in the front, but you can comfortably fit two more 120/140mm fans at the top.
If you prefer liquid cooling, you can fit a 360mm radiator behind the front panel and comfortably cool your internals that way.
Angular, Meshed Front Panel
The Versa J24 puts airflow first, offering full mesh front and top panels, as well as angular modern styling. This case is all about getting work done and looking cool while you do it.
Handy I/O Ports
The top-front panel features two USB 3.0 data ports as well as audio passthrough and RGB lighting control switch.
Radiator Supporting List
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Fan Supporting List
|
|||||||||||||||||||||||||
|
||||||||||||||||||||
| Condition | New |
|---|---|
| Brand | ThermalTake |
| Model Number | Versa J24 |
| Warranty | 7 Days |
| P/N | CA-1L7-00M1WN-01 |
| Series | Versa |
| Case Type | Middle tower |
| Side Panel | 4mm Tempered Glass x1 |
| Dimensions (W x D x H) | 462 x 206 x 414 mm (18.48 x 8.2 x 16.55 inch) |
| Net Weight | 6.2 kg / 13.67 lb |
| Item Color | Exterior & Interior : Black |
| Case Material | SPCC |
| Cooling System | Rear (exhaust) : 120 x 120 x 25 mm fan (1000rpm, 16dBA) Front (intake) : 120 x 120 x 25 mm fan x3 (1000rpm, 16dBA) |
| MotherBoards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
| I / O Ports | USB 3.0 x 2, HD Audio x 1 |
| PSU | Standard PS2 PSU (optional) |
| Fan Support | Front: 3 x 120mm, 2 x 140mm Top: 2 x 120mm, 2 x 140mm Rear: 1 x 120mm |
| Radiator Support | Front: 1 x 360mm Rear: 1 x 120mm |
Write Your Own Review