D-Link DAP-X2810 AX1800 WiFi 6 Access Point

D-LINK DAP-X2810 AX1800 WIFI 6 ACCESS POINT PRODUCT DESCRIPTION:

The Wi-Fi 6 ready DAP-X2810 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect. The DAP-X2810 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%.

Wi-Fi 6 leverages all these features and more to create Wi-Fi with unparalleled performance.

For centralise network management, administrators can use D-Link’s free Nuclias Connect software or Nuclias Connect Hub (DNH-100)5 to configure and manage multiple access points. In addition to streamlining the management process, Nuclias Connect provides network administrators with the means to verify and conduct regular maintenance checks remotely, eliminating the need to send personnel out to physically verify proper operation.

Preloaded with the Nuclias Connect Management Software

D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.

What’s more – management software comes preloaded, and there are no licensing or support fees. Easily manage your network, anytime, anywhere.

Multi-Mode Makes the Most of your Network Capabilities

In order to achieve optimal network performance, the DAP-X2810 has several operational modes tailored to best fit the individual needs of your network. Access Point, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.

Access Point

Add wireless access to your existing wired network.

Wireless Client

Add wireless functionality to a device which does not have a Wi-Fi adapter.

WDS

Wirelessly connect two separate networks.

WDS with AP

Wirelessly connect two separate networks while also providing wireless access to both networks.

SPECIFICATION:

General Device Interfaces 1 x RJ45 console port, 1 x 10/100/1000 Ethernet (PoE) LAN, factory reset, power input LEDs Power/Status Antennas 2 x dual-band internal antennas Antenna Gain 3.2 dBi (2.4 GHz), 4.3 dBi (5 GHz) Maximum Output Power 23 dBm (2.4 GHz), 26 dBm (5 GHz) Data Signal Rate Up to 1800 Mbps Functionality Standards IEEE 802.11a/b/g/n/ac/ax, IEEE 802.3u/ab, IEEE 802.3az Energy-Efficient Ethernet (EEE), IEEE 802.3at PoE Operating Frequency 2.4 - 2.483 GHz, 5.15 - 5.35 GHz, 5.47 - 5.85 GHz Security Protocol WPA/WPA2/WPA3 Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access control, internal RADIUS server Software Network Management Web (HTTP), Secure Socket Layer (SSL), Traffic control, D-Link Nuclias Connect Physical & Environment Dimensions 170 x 170 x 33.7 mm (6.69 x 6.69 x 1.3 in) Weight 477.4 g (1.05 lb) Power Supply 12 V / 2.5 A (optional power adapter), IEEE 802.3at PoE Maximum Power Consumption 14.7 W by ADP, 16 W by PoE Operating Temperature 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F) Storage Temperature -20˚C to 65 ˚C (-4 ˚F to 149˚F) Humidity Operating: 10% to 90% non-condensing
Storage: 5% to 95% non-condensing Meantime Between Failure (MTBF) > 30,000 hours Certifications CE, FCC